PDA

View Full Version : Mac address error! in a CVP 403


mactobi
07-09-2009, 04:46 PM
Hi everybody! i have this error message in a CVP 403 after i press the on/off button. The CVP dosenīt turn on.

The CVP works ok since i bought till now.The morning before this message i was playing with the headphone, suddenly appear pop up message, i turned off the CVP an turn it on again and the message Mac Address error! appear in the blue start screen. No sound at all!

Thanks in advance!

Mactobi

Chuy
07-11-2009, 11:21 AM
Hi mactobi, MAC usually refers to the hardware identification of a network device. Do you have a network device plugged in? If so, remove it and try again.

Regards.

mactobi
07-11-2009, 10:02 PM
No i nver connect this CVP to Internet and never pulg any device in the net port.

dbjorck
07-12-2009, 02:05 AM
Hi!

Everything that can connect has MAC addresses. It could be the internal ethernet adapter. Your only option is to get service. If you're unlucky, the motherboard is fried.

Brgds

Danny

sbrbot
07-29-2009, 03:58 AM
Bad luck! Please, mactobe, report afterwards here what happened. Did you have to go to service and what was the resolution of this problem.